Fafeicy Pneumatic Sander with Vacuum 10000 RPM 1/8 Inch Dust Port

Specification: Item Type: Pneumatic Sander Material: Aluminum Working Speed: 10000RPM Orbital Stroke: Approx.3mm / 0.12in Working Pressure: 0.63Mpa Air Consumption: 10.5 CFM Oscillation Frequency: 10000 OPM Orbital Radius: Approx.0.32cm / 1/8in How to Use: 1. Wear a dust mask and goggles. Adjust the pneumatic sander pressure to 0.6 to 0.8MPa. 2. Add a few drops of pneumatic lubricating oil to the air inlet, connect the dust suction tube and dust collection bag, and firmly attach the sandpaper. 3. Connect the air hose and run the tool without load to ensure no vibration or unusual noise before starting to grind the work piece. 4. Turn on the tool first, then gently place it on the work piece. Let the tool's weight do the work, moving it evenly without applying excessive pressure or staying in one spot for too long. 5. After finishing, lift the tool off the work piece before turning it off, then disconnect the air supply. 6. After daily use, lubricate the tool and run it without load. Clean dust from the suction holes. 7. Always disconnect the air hose before changing sandpaper or performing maintenance. Do not exceed 0.8MPa high pressure air supply. Package List: 1 x Pneumatic Sander 1 x Dust Bag 1 x Dust Hose

• Dust Control: Pneumatic sander removes sanding remains at source using vacuum port and included dust bag for reduced airborne particles.
• Consistent Power: Pneumatic sanding machine runs at 90 PSI pressure with 10.5 CFM air consumption maintaining 10000 OPM oscillation.
• Material Versatility: Vacuum orbital sander works precisely on wood metal and composite surfaces for edging polishing and body repair.
• Rugged Housing: Pneumatic sander uses aluminum components to withstand workshop demands with 0.12 inch orbital stroke.
• Direct Extraction: Pneumatic sanding machine connects to standard extractors via 1/8 inch port for cleaner air during sanding tasks.