EZROAD WD03X10030 Dishwasher Door Hinge Spring Compatible with GE GHDA690P00BB GHDA690P01BB GHDA690P02BB GHDA690P03BB GHDA690P04BB GHDA690P00WW GLDA ZBD AP3994827 1263909 AH1481850 EA1481850 (1)

Part Number: WD03X10030 Replace Part Number: AP3994827 (1263909), AH1481850, EA1481850, PS1481850 Compatible with GE Dishwasher: GHDA690P00BB, GHDA690P01BB, GHDA690P02BB, GHDA690P03BB, GHDA690P04BB, GHDA690P00WW, GHDA690P01WW, GHDA690P02WW, GHDA690P03WW, GHDA690P04WW, GLDA690F00BB, GLDA690F02BB, GLDA690F00WW, GLDA690F02WW, GLDA690M00BB, GLDA690M01BB, GLDA690M02BB, GLDA690M00WW, GLDA690M01WW, GLDA690M02WW, GLDA690P01BB, GLDA690P02BB, GLDA690P03BB, GLDA690P01WW, GLDA690P02WW, GLDA690P03WW, ZBD1870N00SS, ZBD1870N02SS Installation method: Designed as a direct replacement, these springs—compatible with GE dishwashers—can typically be installed in a short time with no special tools. Start by disconnecting power and removing the toe‑kick panel. Then hook one end of the spring through the door‑hinge arm and the other onto the chassis anchor pin. Once both springs are in place, give them a light tug; you may hear two clicks, and the door should hold its position up to about 90° and close gently. Note: This is an aftermarket part, meaning it is not an original manufacturer part. It is designed to be compatible with your device and will function in the same way as your previous part.

• Part Number: WD03X10030
• Replace Part Number: AP3994827 (1263909), AH1481850, EA1481850, PS1481850
• Compatible with GE Dishwasher: GHDA690P00BB, GHDA690P01BB, GHDA690P02BB, GHDA690P03BB, GHDA690P04BB, GHDA690P00WW, GHDA690P01WW, GHDA690P02WW, GHDA690P03WW, GHDA690P04WW, GLDA690F00BB, GLDA690F02BB, GLDA690F00WW, GLDA690F02WW, GLDA690M00BB, GLDA690M01BB, GLDA690M02BB, GLDA690M00WW, GLDA690M01WW, GLDA690M02WW, GLDA690P01BB, GLDA690P02BB, GLDA690P03BB, GLDA690P01WW, GLDA690P02WW, GLDA690P03WW, ZBD1870N00SS, ZBD1870N02SS
• Installation method: Designed as a direct replacement, these springs—compatible with GE dishwashers—can typically be installed in a short time with no special tools. Start by disconnecting power and removing the toe‑kick panel. Then hook one end of the spring through the door‑hinge arm and the other onto the chassis anchor pin. Once both springs are in place, give them a light tug; you may hear two clicks, and the door should hold its position up to about 90° and close gently.
• Note: This is an aftermarket part, meaning it is not an original manufacturer part. It is designed to be compatible with your device and will function in the same way as your previous part.